non slip ironing board cover_table cloth types

The Rise of Portable Rotary Air Compressors A Comprehensive Overview

Applications Across Different Fields

Conclusion

Daily cleaning of the drilling rig is the foundation of maintenance work and the most important step. After each use, thoroughly clean the machine with compressed air or clean water, especially the radiator and air filter. This can prevent performance degradation due to overheating, as well as avoid faults caused by the accumulation of dust and mud.

El mantenimiento de los chocks es vital para el funcionamiento eficiente de los laminadores. Con el tiempo, el desgaste natural y las condiciones operativas pueden debilitar la estructura de los chocks. Las inspecciones regulares son necesarias para detectar cualquier signo de daño, como grietas o deformaciones. Ignorar el mantenimiento adecuado puede llevar a fallas catastróficas, que no solo provocan tiempos de inactividad prolongados, sino que también pueden resultar en costosas reparaciones y en la pérdida de materia prima.

The main components of submarine hammer drilling equipment include the drill rig, hammer, drill pipes, and the drill bit. The drill rig is often mounted on a surface vessel or a floating platform and is designed to support the excessive weight and dynamic forces encountered during drilling operations.

1. Rotary Drills These are commonly used for deep hole drilling, making them ideal for mineral exploration. Rotary drills operate using a rotating drill bit that cuts through rock layers with the aid of a drilling fluid that cools the bit and removes cuttings from the hole.

Understanding Down-the-Hole Hammer Drilling

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank