ironing board cover for quilters_fitted table cloth rectangle

ሓሳብ ን የሃምሌ ቋሚ የመታ ቀረባ ማብረቅ ሥርዓት

Conclusion

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

One of the critical features of the EN 857 1SC hose is its ability to operate under high pressure—typically up to 250 bar (3625 psi). This makes it suitable for demanding applications where hydraulic systems function under significant stress. Moreover, its compact design allows for easier routing in confined spaces, making it an ideal choice for equipment where space is at a premium.

The automotive industry also benefits from hydraulic hose hand crimpers. They are used to create and repair hoses for brake systems, power steering, and transmissions. The ability to work with hydraulic hoses directly contributes to vehicle safety and reliability, making it imperative for mechanics to have access to quality hand crimpers.

ポリエアホースのりいについては、にしっかりときることでをばすことができます。また、のチェックやなをうことで、れやをにぐことができます。

Advantages of Hydraulic Hoses

What Does 3000 PSI Mean?