18 wide ironing board cover_washing machine dryer plastic cover

Oil seals are always exposed to a lot of chemicals, both mild and harsh chemicals. The seals react by showing some signs like cracks, blisters, and discoloration especially when the chemical is harsh. This clearly shows that the chemical is not compatible with the seal, which goes as far as affecting its cross-link density (increase or decrease). When the cross-link density increases, the seal material becomes harder, but when it decreases, the seal material becomes softer.

Leather is probably the oldest of the lip materials still in common use, but the move towards mass production methods has seen a massive increase in the development of synthetic rubbers which lend themselves to accurate and repeatable injection and compression moulding. Nitrile (NBR) is still by far the most common elastomer for “normal” use, whilst Viton® (FKM/FPM) is rapidly replacing Polyacrylate (ACM) and Silicone (VMQ) for high-temperature applications. Viton® also has high resistance to abrasion and chemical attack making it a preferred elastomer. Recent developments in the use of PTFE for Rotary shaft seals has caused widespread interest particularly for high-speed shaft rotation or poor lubrication applications.