ironing board cover price_large ironing board cover

For more severe oil-seal service at temperatures of 160°C (320°F) or higher for extended periods, more resistant fluoroelastomer compositions are required for long service life. High-fluorine VDF/PMVE/TFE elastomers, along with TFE/olefin FEPM elastomers, are much less susceptible to attack by oil additives. TFE/P fluoroelastomers have the requisite chemical resistance, but have low fluorine content, leading to relatively high swell and to soft vulcanizates with lower wear resistance than desired.

The depth of the bonded seal can be less and the space between the bore and the outside diameter can be changed for ease of fitting. The bonding of rubber to metal is an important factor to be considered in the manufacture of such seals and should be considered carefully, since failure of the bond will cause the seal to fail. The metal case of the oil seal is usually made from mild steel of deep drawing quality which enables blanking, punching, stamping of the steel to the required dimensions.