extra large ironing board cover and pad_non slip ironing board cover

Nominal seal width
b, mm

Mark the position of the rotor arm by lightly scratching a line on the distributor body. Disconnect the LT lead from the distributor body.

Always start by making sure the oil seal is facing the right direction. The oil seal must be positioned with its spring to the side of the medium to be sealed. The oil seal must then be pressed into the bore. It must fit tightly (H8 in the groove is recommended). Use appropriate tools for this, such as an impact socket set, to ensure that the force is applied evenly during pressing. The oil seal must never be hammered into the bore with brute force, but eased in.

Notes
1) ISO: International Organization for Standardization
2) 2) JIS: Japanese Industrial Standard

Having problems installing oil seals? The part has had many updates in recent years, which has totally changed the installation process. In this blog, our specialists will give you information and installation tips so that these oil seals no longer cause difficulties during your overhaul or repair job.