42 x 12 ironing board cover_waterproof outdoor tablecloth

A standard oil seal consists of an outer circular metal disk with an inner flexible rubber which is affixed to the metal during vulcanization. The bonded seal has no loose parts to allow leakage of oil or ingress of any contaminants. This kind of seal is more accurate, and can easily be fitted into a smaller space. An example is shown in Figure 2.9.

Oil seals increasingly had to meet higher requirements, which is why PTFE was developed in 1980. This variant can better withstand higher engine speeds, higher oil temperatures, longer oil intervals and modern lubricants. In addition, the oil seal contains a wider contact surface, which ensures less wear.