padded ironing board cover_small rectangle tablecloth

The skeleton oil seal structure consists of three parts: the oil seal body, the reinforced skeleton and the self-tightening coil spring. The sealing body is divided into bottom, waist frame oil seal structure diagram, cutting edge and sealing lip according to different parts. Generally, the inner diameter of the skeleton oil seal in the free state is smaller than the shaft diameter, that is, it has a certain interference. Therefore, after the oil seal is installed on the oil seal seat and the shaft, the pressure of the oil seal edge and the contraction force of the self-tightening coil spring will produce a certain radial tightening force on the shaft. After a period of operation, the pressure will rapidly decrease or even disappear. , Therefore, adding a spring can compensate for the self-tightening force of the oil seal at any time.

Even the slightest chip or dent can cause contaminants to infiltrate your oil seal. If there are any scratches on the shaft, a leak path may develop, allowing the lubricant to drip. To protect the shaft from damage, wrap it in a mesh rubber screen and store it vertically in its compartment. This way, it can be shielded from potential cracking.

GV