bee ironing board cover_ironing board cover 97 x 34

Sometimes, two different kinds of fluids leak from one chamber to another and gets mixed up. Here, this type comes as a boon. This is a metal inserted duplex type oil seal recommended on such assembly where mix-up of two different fluids is to be prevented.

If the seal is being fitted to original equipment you may have some influence over the shaft and housing bore finish, but if you are replacing a worn seal you still need to take into account the condition of these 2 essential parts. Check for sharp edges and burrs – particularly on the shaft and housing chamfers or you could ruin the seal before you start up. If the shaft is too worn consider using an M Barnwell Services Shaft Repair Kit.