18x54 ironing board cover_round table cloth with elastic

4. Use Compatible Fluids Always use hydraulic fluids that are compatible with the hose material to prevent deterioration of the inner lining.

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

In summary, understanding the costs associated with brake hoses is vital for vehicle owners. By considering factors such as material quality, vehicle type, brand reputation, installation costs, and local market conditions, you can make informed decisions regarding your brake system's maintenance. Remember that safety should always come first, and investing in quality components is a step toward ensuring reliable vehicle performance.

The incorporation of stainless steel braiding enhances the structural integrity of the hose. Stainless steel, renowned for its strength and resistance to corrosion, provides a protective layer that increases the hose's pressure ratings and allows it to handle demanding operational conditions. The combination of PTFE and stainless steel creates a flexible yet robust hose that can adapt to various requirements.

Why Crimping Matters

Proper installation and maintenance are crucial for the safety and longevity of LPG braided gas hoses. When installing, ensure that all connections are secure and fitted with the appropriate fittings for LPG use. It is essential to regularly inspect hoses for signs of wear, kinks, or abrasions, as these can indicate potential failure points.