small ironing board cover and pad_ironing board cover 114 x 38

2. Working Pressure This hose is engineered to withstand substantial pressure, making it ideal for applications that involve high-stress environments. The 208 in its designation often reflects the hose's ability to handle pressures up to 208 bar (or approximately 3000 psi), which is commonly required in various machinery and equipment.

3. Use Protectors To protect hose ends from wear, consider using hose fittings with metal or rubber protectors.

The Importance of Auto Fuel Hoses Understanding, Maintenance, and Selection

Conclusion

Safety is a paramount concern when dealing with hazardous materials. Equipping workers with personal protective equipment (PPE) and ensuring that they understand proper handling procedures is as vital as using the right hose. Training sessions can help familiarize staff with potential risks and the importance of using chemical resistant hoses properly.

Сүүлийн үед өндөр даралтын шлангуудын үйлдвэрлэлд шинэ технологи, инновацуудыг нэвтрүүлж байна. Жишээлбэл, олон давхар шлангийн загварууд нь илүү удаан эдэлгээтэй, илүү их даралтыг тэсвэрлэх чадвартай болж байна. Энэ нь үйлдвэрлэгчдэд зардлыг бууруулах, үр ашигтай үйлдвэрлэлийг бий болгох боломжийг олгож байна.

- Store Properly When not in use, store the hose coiled and out of direct sunlight to prevent UV degradation. Avoid placing heavy objects on top of the hose as well.

The automotive industry also benefits from hydraulic hose hand crimpers. They are used to create and repair hoses for brake systems, power steering, and transmissions. The ability to work with hydraulic hoses directly contributes to vehicle safety and reliability, making it imperative for mechanics to have access to quality hand crimpers.

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

3. Versatile Applications As mentioned earlier, these hoses are versatile and can be used in various industries, including automotive, aerospace, chemical processing, and construction. Their ability to handle a wide range of fluids and gases makes them ideal for numerous applications.