standard ironing board cover_macrame tablecloth

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

At its core, a hydraulic hose hand crimper is designed to crimp the end of hydraulic hoses onto fittings. The process of crimping involves compressing the fitting onto the hose with a specific force, which creates a leak-proof seal. This is critical because hydraulic systems operate under high pressure, and any leakage can lead to system failure, safety hazards, and costly downtime.

Hydraulic hoses consist of three main components the inner tube, the reinforcement layer, and the outer cover. The inner tube is responsible for carrying the hydraulic fluid, while the reinforcement layer, usually made of steel wire braids or spirals, provides strength to withstand high pressures. The outer cover protects the hose from environmental elements, such as abrasion, chemicals, and temperature extremes.

- Agriculture In farming, suction hoses are used to transfer water from irrigation sources to crops. They enable efficient water distribution, especially in large-scale farming operations where water needs to be drawn from wells or reservoirs.

- Application Requirements Assess the specific requirements of the application, including operational pressure, temperature, and fluid compatibility. A thorough understanding of these factors will guide the optimal hose selection.

Өндөр даралтын шланга Гүйцэтгэл, хэрэглээ, ашиг тус

2. Agricultural Machinery Tractors and harvesters utilize hydraulic systems powered by hoses. These hoses enable farmers to operate various implements such as seeders, plows, and hydraulic lifts, which help increase efficiency in planting and harvesting processes.

- Store Properly When not in use, store the hose coiled and out of direct sunlight to prevent UV degradation. Avoid placing heavy objects on top of the hose as well.

One of the standout features of stainless braided oil lines is their exceptional durability. Unlike traditional rubber hoses, which can dry out and crack over time, stainless braided lines are resistant to various environmental factors, including temperature fluctuations, fuel, and chemicals. This resistance significantly extends their service life, making them a more cost-effective solution for both automotive and industrial applications.