table top ironing board cover_table top ironing board cover

Steam cleaner hoses can vary in diameter, length, and material. Common options include

Conclusion

The transportation industry also benefits from hydraulic rubber hoses, particularly in vehicles such as trucks and buses that depend on hydraulic braking systems and steering mechanisms. The integrity of these hoses is critical to safety, as any failure could lead to catastrophic results.

Introduction

- Construction In construction, steam is used for cleaning and curing concrete. High pressure steam hoses make it possible to deliver steam to specific areas where it is needed.

4. Temperature Range They can typically operate in a temperature range of -40°C to +100°C, making them suitable for various environments.

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Understanding 1% and 4% High Pressure Hoses A Comprehensive Overview

1. รอยแตกร้าวหรือเสียหาย หากท่อยางเบรกมีรอยแตกหรือสัญญาณของการเสื่อมสภาพ เช่น สึกกร่อนหรือมีรอยด่าง มีโอกาสสูงที่น้ำมันเบรกจะรั่วไหล