door ironing board cover_pink tablecloth

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

1. Material and Build Quality A high-quality crimping tool is typically made from durable materials like steel or aluminum to withstand repeated use without deforming. Look for tools with a robust design that can handle industrial-grade applications.

Las mangueras hidráulicas son un componente esencial en muchos sistemas industriales y maquinarias pesadas. Su diseño y funcionamiento permiten la transferencia eficiente de fluidos a alta presión, lo que es crucial para el rendimiento de diversos equipos. Dentro de este contexto, vamos a explorar la importancia de las mangueras hidráulicas que operan en un rango de presión del 3%, que aunque puede parecer bajo, tiene aplicaciones significativas en la industria.

3. Avoid Overstretching Be mindful not to stretch the hose beyond its limits, as this can lead to kinks and eventual failure. Always use the hose within recommended working lengths.

Understanding Pump Suction Hoses Importance and Applications

The versatility of hydraulic hose hand crimpers means they are utilized in a myriad of industries. In the construction sector, for example, hydraulic hoses are essential for powering heavy machinery like excavators and forklifts. Hand crimpers allow workers to quickly assemble or replace hoses, ensuring that equipment remains operational and productive.

Braided hoses are widely used in various sectors due to their versatility. Here are some common applications

Understanding HVAC Vacuum Hoses Importance and Best Practices

1. Clean Regularly After use, clean the exterior of the hoses to remove refrigerant residues or contaminants. This prevents cross-contamination during future use.

Maintenance and Safety