funky ironing board cover_grid tablecloth

PTFE, which is used in the well-known brand Teflon®, is less commonly used, but it is the preferred material for specific rotating seals in the chemical, food and pharmaceutical industries. This material is notable for having a very low frictional resistance and the best chemical resistance. It can also withstand a very wide range of temperatures in these types of seals; -80 ˚C to 200 ˚C. The shafts on which oil seals with PTFE lips are used require a harder and finer finish. Something like an axle sleeve can also be used to meet this requirement.

If these specific tools aren’t available, it’s entirely possible to correctly seat an oil seal in its housing using a hammer. Ideally, this hammer will be plastic or rubber due to it’s more forgiving nature. Using this and a strike plate that covers the entire seal will lend you accuracy while driving it in. The downside to this method is the inability to drive the seal any further than the strike plate will allow.

-

The purpose of the oil seals is