extra large ironing board cover and pad_ironing board cover 110 x 35

Figure 5 explains the JTEKT seal numbering system.
Seal numbers consist of
　(1) the seal type code,
　(2) the spring code,
　(3) the lip type code,
　(4) the dimensional numbers, and
　(5) the special type code,
and Table 6 shows examples of each of these codes/numbers.

Refit the rocker or cam cover, aligning its fixing holes with those on the head. Check that the gasket edge aligns with the cover flange all round, and is not distorted. If necessary, adjust it gently with tweezers or long-nosed pliers. Tighten bolts evenly to just compress the gasket.