jumbo ironing board cover_κάλυμμα και μαξιλαράκι σιδερώστρας

Understanding High Pressure Propane Lines Safety and Applications

2. Pressure Rating These hoses are rated for high pressures, often exceeding 250 psi (pounds per square inch). The pressure rating is vital for determining the suitability of the hose for specific applications in various industries.

- Regular Inspection Check the hose for any signs of wear, such as cracks or leaks. Early detection can prevent more significant issues in the future.

5. Replacement When hoses show significant wear or damage, replace them promptly to prevent leaks or failures, which could lead to costly downtimes or accidents.

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

고무 호스의 중요성과 3/4인치 호스의 활용

There are several types of hydraulic oil hoses, each tailored for specific applications and requirements. Some common types include