cute ironing board cover_iron shoes in china

As a merit in the mining of rock, the drilling rig has to be mentioned. In addition, the drilling rig can also be used as a breaker to break up hard layers such as concrete. According to its power source, the rock drill can be divided into four categories: pneumatic rock drill, internal combustion rock drill, electric rock drill and digging and changing drill.

1. الكفاءة العالية تعتبر هذه الضواغط من أكثر الأنظمة كفاءة في تحويل الطاقة إلى هواء مضغوط. بفضل تصميمها المبتكر، يمكنها العمل لفترات طويلة بدون الحاجة إلى صيانة متكررة.

Conclusion

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.

2. Correct Configuration Ensuring that the jaw plates are correctly aligned and configured can prevent unnecessary wear and improve the overall crushing performance.

(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.

The following matters should be paid attention to during the use of the drilling rig, and the correct use can bring greater benefits

One of the most critical components of a jaw crusher is the jaw plates. These are the surfaces that come into direct contact with the material being crushed. They typically come in two varieties the fixed jaw plate and the movable jaw plate. The fixed jaw plate is stationary and mounted on the frame, while the movable jaw plate moves back and forth, creating a crushing motion. The wear and tear of jaw plates are significant since they constantly encounter abrasive materials. Hence, they are often manufactured from high-grade manganese steel to enhance their durability.