mesh ironing board cover_pastel rainbow tablecloth

SAE 100R2AT is a hydraulic hose specification developed by the Society of Automotive Engineers (SAE). It is primarily designed for high-pressure hydraulic applications. The R2 indicates that it is a two-wire braided hose, while the AT signifies that it is designed to be used with oil-based hydraulic fluids.

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Understanding High Pressure Propane Lines Safety and Applications

Benefits of Using a Steam Cleaner Hose

3. Fluid Compatibility Hydraulic hoses must be compatible with the fluids they carry. Moving from a 3% to a 4% hose can also mean improved material compatibility with various hydraulic fluids. This reduction in chemical degradation leads to fewer maintenance interventions and enhances the reliability of the hydraulic system over time.

3. Flexibility and Bend Radius High pressure steam hoses are designed for flexibility, allowing for easy maneuverability in tight spaces. The minimum bend radius is an important specification that indicates how tightly the hose can be bent without damaging it.

The versatility of hydraulic hose hand crimpers means they are utilized in a myriad of industries. In the construction sector, for example, hydraulic hoses are essential for powering heavy machinery like excavators and forklifts. Hand crimpers allow workers to quickly assemble or replace hoses, ensuring that equipment remains operational and productive.

Materials and Construction