wide ironing board cover and pad_patchwork tablecloth

Leather is probably the oldest of the lip materials still in common use, but the move towards mass production methods has seen a massive increase in the development of synthetic rubbers which lend themselves to accurate and repeatable injection and compression moulding. Nitrile (NBR) is still by far the most common elastomer for “normal” use, whilst Viton® (FKM/FPM) is rapidly replacing Polyacrylate (ACM) and Silicone (VMQ) for high-temperature applications. Viton® also has high resistance to abrasion and chemical attack making it a preferred elastomer. Recent developments in the use of PTFE for Rotary shaft seals has caused widespread interest particularly for high-speed shaft rotation or poor lubrication applications.

An oil seal is a type of mechanical seal used to prevent the leakage of oil from machinery components. The dimensions of an oil seal are usually specified in terms of its inner diameter, outer diameter, and thickness. For example, a 38x52x7 oil seal has an inner diameter of 38mm, an outer diameter of 52mm, and a thickness of 7mm.