metallised ironing board cover_happy birthday table cover

Fit the gasket to the cover, making sure any screw holes line up. If the gasket has tongues, fit them into their cutouts.

3.  TEMPERATURE: Similar to the pressure level, you need to know what temperature your machinery can operate at. You need to choose a seal that can withstand the heat or cold. PTFE have the widest rang of temperature, making them a safe option when you are uncertain of the range.

To install an oil seal properly, the shaft must be undamaged. This is so the oil seal can do its job properly on the one hand, and to prevent it from being damaged during fitting on the other. In addition, it is very important to lubricate the shaft, the sealing lip and the bore with plenty of grease. This will allow the oil seal to slide more easily over the shaft and prevent dry running after the first rotation. The oil seal may also come into contact with the keyway, thread or other grooves when sliding over the shaft. By taping or covering the shaft at the location of these irregularities with oil-soaked paper, the oil seal can be mounted without damage to the sealing lip.