18 x 49 ironing board cover_wildflower tablecloth

The performance of these seals depends to a large extent on a suitable unit load being maintained at the seal-shaft interface. These seals withstand a pressure of 15PSI and their working depends on parameters like shaft diameter, shaft speed, working temperature, service conditions, etc

NBR, also known as nitrile rubber or nitrile, is the most popular material for an oil seal because of its good resistance to many oils and greases, such as mineral grease and hydraulic oil. Depending on their composition, synthetic oils and greases, such as those based on glycol, can damage NBR rubber materials. Depending on the amount of glycol, a PTFE lip seal may be the best choice. NBR is also unable to cope with contact with acids and solvents. The rubber is suitable for oil and grease at temperatures from -35 °C to 100 °C.