ironing board cover for dryer_60 inch round tablecloth

Metal inserts must be carefully prepared in operations involving cleaning and roughening surfaces (grit-blasting or phosphatizing), stamping out parts, application of primer (usually by dipping), and curing of the primer (often by baking for a short time at moderate temperature).³ Primer curing minimizes the possibility of wiping primer off portions of the insert by stock flow during molding. The treated metal inserts must be used within a relatively short time (usually a day or less), so that functionality necessary for bonding is not lost by reaction with moisture in the air. Freshness of the primer surface is particularly important for peroxide-cured and base-resistant fluoroelastomer compounds. Compound formulation should be adjusted to attain good adhesion.