When adjusting rollers that attach directly to the frame, safety is paramount. Begin by closing the door and securely locking it to prevent it from swinging open during adjustment Begin by closing the door and securely locking it to prevent it from swinging open during adjustment Begin by closing the door and securely locking it to prevent it from swinging open during adjustment Begin by closing the door and securely locking it to prevent it from swinging open during adjustmentadjusting screen door rollers. Locate the screws or clips holding the roller in place. For screws, use a screwdriver to loosen them slightly but do not remove them completely. For clips, press down on the tab or lever to release the tension. Once loosened, gently lift or push the roller into the desired position. Ensure that the roller is parallel to the ground and evenly spaced from the door's edge. Re-tighten the screws or re-engage the clips, ensuring they are snug but be careful not to over-tighten, which can cause damage to the door or frame.