tabletop ironing board cover_classic front load washing machine cover

There are many titanium dioxide manufacturer in market. Rutile Titanium dioxide in the form of a white pigment is widely used in the industry:
1. In the production of inks and printing inks - as a pigment with excellent whiteness and very good properties.
2. Plastic materials, such as: wall claddings, floor coverings (linoleum, rubber, PVC), roofing, wires, cables - titanium white is included in the protective layer against degradation of atmospheric conditions (especially UV radiation), and has concealing properties.
3. Cosmetics: gels, eye shadows, foundation, lipstick, pastes (including teeth) - as a component of pigments.
4. Tanning preparations - surface-modified with a hydrophobic coating - acts as a UV filter.
5. Paper pulp - anatine is used as a filler and reinforcement.
6, Packaging film, adhesive mortars, plasters, cement, caulking agents, ceramic tiles - is an additive that improves resistance to colour change.
7. PCigar production - titanium white gives the ash a white color.

We know that there are a lot of suspended organisms and colloidal impurities in natural water. The forms of suspended solids are different. Some large particles of suspended solids can settle under their own gravity. The other is colloidal particles, which is an important reason for the turbidity of water. Colloidal particles can not be removed by natural settlement, because colloidal particles in water are mainly clay with negative electricity The Brownian motion of colloidal particles and the hydration on the surface of colloidal particles make colloidal particles have dispersion stability. Among them, electrostatic repulsion has the greatest influence. If coagulant is added to water, it can provide a large number of positive ions and accelerate the coagulation and precipitation of colloid. Compressing the diffusion layer of micelles makes the potential change into an unstable factor, which is also conducive to the adsorption and condensation of micelles. The water molecules in the hydrated film have fixed contact with the colloidal particles and have high elastic viscosity. It is necessary to overcome the special resistance to expel these water molecules. This resistance hinders the direct contact of the colloidal particles. The existence of some hydrated films depends on the electric double layer state. If coagulant is added to reduce the zeta potential, the hydration may be weakened. The polymer materials formed after coagulant hydrolysis (the polymer materials directly added into water generally have chain structure) play an adsorption bridging role between the colloidal particles. Even if the zeta potential does not decrease or does not decrease much, the colloidal particles can not contact each other and can be adsorbed through the polymer chain Colloidal particles can also form flocs.

Titanium dioxide has similar uses in non-food products. It is used in sunscreen as effective protection against UVA/UVB rays from the sun, which creates a physical barrier between the sun’s rays and the skin. It’s also used to whiten paint, paper, plastic, ink, rubber, and cosmetics.