personalised ironing board cover_ironing board cover pink

The Importance of Auto Fuel Hoses Understanding, Maintenance, and Selection

Yuqorī bosim yoqilg‘i shlangi muhim ahamiyat va xavfsizlik

In many countries, LPG hoses are subject to strict regulations and standards to ensure safety. These regulations dictate material quality, pressure ratings, and testing procedures. It's vital to purchase hoses that comply with local standards, as this compliance can significantly reduce the risk of gas leaks and other hazardous situations.

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Hydraulic hoses consist of three main components the inner tube, the reinforcement layer, and the outer cover. The inner tube is responsible for carrying the hydraulic fluid, while the reinforcement layer, usually made of steel wire braids or spirals, provides strength to withstand high pressures. The outer cover protects the hose from environmental elements, such as abrasion, chemicals, and temperature extremes.

In the world of engineering and manufacturing, the importance of selecting the right type of hose for various applications cannot be overstated. Among the various types of hoses available, braided hoses have emerged as a popular choice across a multitude of industries, thanks to their durability, flexibility, and resistance to various environmental factors. In this article, we will delve into the characteristics of braided hoses, their applications, benefits, and factors to consider when choosing the right braided hose for your needs.

Una manguera hidráulica típica está compuesta de varias capas la capa interior que contiene el fluido, una capa de refuerzo que proporciona resistencia a la presión, y una capa exterior que protege contra los elementos externos. Cuando hablamos de mangueras que manejan un 3% de presión, nos referimos a aplicaciones donde la presión y el volumen de fluido son moderados, lo que a su vez requiere materiales específicos para asegurar que la manguera no solo sea resistente, sino también flexible.