48 ironing board cover_colorful ironing board covers

Les flexibles de frein sur mesure sont conçus pour offrir une performance optimale. Ils peuvent supporter des pressions plus élevées, ce qui se traduit par une réactivité accrue du système de freinage. Cela est particulièrement important pour les véhicules de performance ou ceux qui sont souvent soumis à des conditions de conduite sévères, comme les voitures de course.

Applications of 1% and 4% High Pressure Hoses

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

2. Diameter and Length Pump suction hoses come in various diameters and lengths. The diameter of the hose should match the pump intake to prevent restrictions that can impair the pump's efficiency. Similarly, the length of the hose should be kept to a minimum to reduce friction losses and maintain optimal suction performance.

6. Inspect the Connection After crimping, visually inspect the fitting and hose to ensure that the crimp is even and secure. A poorly crimped connection can compromise the system's integrity.

يعتبر مصنع الخرطوم المضفر واحداً من الرواد في صناعة أنظمة الأنابيب الحديثة. حيث يتم استخدام الخرطوم المضفر في العديد من التطبيقات الصناعية والحياتية، مما يجعله عنصراً أساسياً في العديد من العمليات. يتميز هذا النوع من الخراطيم بالقوة والمرونة، مما يجعله مثاليًا لمجموعة واسعة من الاستخدامات.

1. Extrusion The first step in the manufacturing process is extrusion, where the rubber compounds are heated and forced through a die to create a continuous tube. This tube befits the size and specifications required for various hydraulic applications.