ironing board cover 140cm x 45cm_washing machine outdoor cover

The skeleton oil seal structure consists of three parts: the oil seal body, the reinforced skeleton and the self-tightening coil spring. The sealing body is divided into bottom, waist frame oil seal structure diagram, cutting edge and sealing lip according to different parts. Generally, the inner diameter of the skeleton oil seal in the free state is smaller than the shaft diameter, that is, it has a certain interference. Therefore, after the oil seal is installed on the oil seal seat and the shaft, the pressure of the oil seal edge and the contraction force of the self-tightening coil spring will produce a certain radial tightening force on the shaft. After a period of operation, the pressure will rapidly decrease or even disappear. , Therefore, adding a spring can compensate for the self-tightening force of the oil seal at any time.

The metal case is the exterior (or frame) of the oil seal, the principal function of which is to give rigidity and strength to the seal. The material of the case must be selected depending on the environment where the seals are to be used. Often the metal case is covered by the same rubber material used in the sealing element, which also helps seal the exterior of the oil seal in the housing bore. Common case material types are: