extra thick ironing board cover_mantel de peva con reverso de franela

L'importance des flexibles de frein

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Conclusion

Applications of Hydraulic Oil Hoses

When selecting an air hose crimper, it is essential to consider factors such as

Conclusion

The hydraulic brake system operates on the principle of Pascal’s law, which states that pressure applied to a confined fluid is transmitted undiminished throughout the fluid. In modern vehicles, hydraulic hoses are vital components that ensure this pressure is conveyed effectively. When the driver presses the brake pedal, the master cylinder pushes brake fluid through the hydraulic hoses to the brake mechanisms at the wheels. This action results in the brake pads being pressed against the rotors, causing the vehicle to slow down or stop.

Mangueras Hidráulicas de 3% Importancia y Aplicaciones

Applications in Automotive Engineering