adhesive ironing board cover_custom table covers

عملية التصنيع

Vacuum hoses are primarily used during the evacuation process of HVAC systems. When a new system is installed or when repairs are made, it is crucial to remove any air and moisture trapped inside the refrigerant lines. Air and moisture can lead to various issues such as reduced efficiency, corrosion, and even compressor failure. By using a vacuum hose connected to a vacuum pump, technicians can create a negative pressure environment within the system, allowing for the removal of these contaminants.

Applications Across Industries

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

To ensure your rubber airline hose remains functional and prolong its life, consider the following maintenance tips

Hand crimpers are particularly valued for their portability and ease of use. Unlike larger hydraulic crimping machines, hand crimpers can be operated manually, making them ideal for on-site repairs and installations. This mobility allows technicians to efficiently handle maintenance tasks in various environments, such as construction sites, automotive workshops, and agricultural fields.

While the 5 8 hydraulic hose is designed for durability, regular maintenance is necessary to ensure its optimal performance. Operators should

4. Bend Radius When routing braided hoses, consider the minimum bend radius to avoid kinks that could impede flow or damage the hose.

The advantages of using ultra high pressure hoses are numerous, benefitting both operators and industries

Key Features of 5 8 Hydraulic Hose