cleaning ironing board cover_handmade ironing board covers

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Understanding 1% and 4% High Pressure Hoses A Comprehensive Overview

2. Durability With the increase in percentage reinforcement comes improved durability. A 4% hydraulic hose may be more resistant to wear, abrasion, and environmental factors, such as UV radiation and extreme temperatures. This durability translates into a longer lifespan, making it a cost-effective investment for businesses reliant on hydraulic systems.

While hydraulic hoses are reliable, safety is paramount in their usage. Regular inspections are necessary to identify wear and tear, as even a minor defect can lead to system failure and potential hazards. High-pressure hydraulic systems can be dangerous if hoses rupture, so employing quality hoses from reputable manufacturers and adhering to proper maintenance schedules is essential.

Conclusion

5. Oil and Weather Resistant The synthetic rubber layers protect against oil degradation and weather impacts, ensuring a longer service life.

- Construction Equipment Bulldozers, excavators, and other heavy machinery rely on hydraulic systems to operate effectively. Spiral wire hoses are used to connect hydraulic pumps, valves, and actuators, ensuring seamless operation.

An LPG braided gas hose is specifically designed to transport liquefied petroleum gas safely. Its construction typically includes an inner tube made of synthetic rubber or thermoplastic material that is reinforced with braided strands, often made of stainless steel or synthetic fibers. This braiding provides not only additional strength and durability but also resistance to external factors such as abrasion and chemicals, making it suitable for both residential and commercial applications.