table top ironing board cover and pad_cool ironing board cover

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Proper maintenance of sandblast rubber hoses is crucial to ensure optimal performance and safety. Routine inspections should be conducted to check for signs of wear, kinks, or cracks. Keeping the hoses clean and free of abrasive materials is also essential to prolong their lifespan.

Ventajas de las Mangueras de 3%

What is a Steam Cleaner Hose?

Signs of Brake Hose Issues

L'importance des flexibles de frein

Les flexibles de frein sur mesure représentent une avancée significative dans le domaine de la sécurité automobile. En offrant un ajustement parfait, des matériaux de haute qualité et une performance améliorée, ils garantissent que chaque véhicule fonctionne de manière optimale. Pour les conducteurs soucieux de leur sécurité et de celle de leurs passagers, opter pour des flexibles de frein sur mesure est une décision judicieuse. Que ce soit pour une voiture de sport, un véhicule utilitaire ou une voiture familiale, ces composants spécialisés assurent non seulement une conduite plus sûre, mais également un plaisir de conduite inégalé. Investir dans des flexibles de frein sur mesure, c'est investir dans la sécurité et la performance à long terme.

1. Preparation Start by cutting the hose to the desired length and inserting the fitting into the end of the hose. Ensure that the fitting is fully seated.