felt ironing board cover_wide ironing board cover

Head Gasket and Valve Cover Gasket: Ensuring Engine Integrity

Also known as a Rotary Shaft Seal, Shaft Seal, Lip Seal, Elastomeric Lip Seal or any variation of these. It is a simple device for excluding dust, dirt, water or any other contaminant whilst retaining lubricant in rotary shaft equipment. Generally, it has been developed as a means of protecting the bearings of rotating shafts.

No single physical property of rubbers is responsible for the successful performance of an oil seal or ‘O’ ring. The ultimate tensile strength, breaking elongation, modulus, shore hardness, creep and stress relaxation in tension and compression loads are all important physical properties that characterize a seal or ‘O’ ring. Compression strength and set together with stress relaxation or decay are important for effective sealing. The difference in these properties in a swollen seal is highly critical. An optimum swelling value in a fluid medium is a desirable feature. De-swelling decreases the seal pressure against the wall of the housing where the seal is fixed, leading to leakage. Over swelling minimizes the physical properties of the rubber. Seals made of polysulfide rubbers have extreme fuel resistance but undesirably high compression set. The effect of temperature on the seal is an important factor. Swelling under stress can increase at higher temperatures and a suitable compounding technique should be adopted to reduce this effect.

There is a British Standard laid down for the control of synthetic rubbers. BS 3574 (1989) helps to determine shelf life – for instance, Nitrile (NBR) and Polyacrylic (ACM) are Group ‘B’ rubbers and have a 7-year life, whilst Silicone (VMQ) and Fluoroelastomers (Viton®) are Group ‘C’ rubbers and have a 10-year shelf life. PTFE and Leather do not come into this category but like the others should be kept in the original packing for as long as possible away from direct light, dust, and humidity. Ozone, which can also be produced by battery-driven forklift trucks has a very bad effect on synthetic rubbers. Finally, protect the sealing lip – DO NOT hang the seals on nails, wire etc.