Our free consultation explores the application of your spring. We find solutions to questions such as ‘What is its failure mode?’ and ‘Are you looking to improve an existing design, or does it need to be lighter, stronger and more corrosion resistant?’

275% Veggrør for bedre byggekvalitet

Inoltre, le staffe Gates sono realizzate con materiali di alta qualità, che offrono una resistenza alla corrosione e agli agenti atmosferici. Questo significa che, una volta installate, richiedono poca manutenzione nel tempo e possono garantire prestazioni eccellenti anche in ambienti difficili. La loro durabilità rende le staffe Gates un investimento saggio per qualsiasi progetto di costruzione.

Introduction to Coil Springs

The maximum tensile beam stresses are located on the OD when the spring is subject to windup deflections; conversely, the stresses on the ID are at maximum compression. When the spring is subject to unwind, the stresses are the opposite. It is critical that there be no nicks or cuts at the area where the stresses are at maximum. These flaws would increase the stresses, and possibly initiate cracks. For the same reason, machined torsional springs should contain stress relief holes or slots to help mitigate “stress risers” as the coil section changes into the solid structural section of the spring end.

Quenching oil is favored for its rapid cooling capabilities compared to other methods. The quenching process requires meticulous monitoring to ensure that the final coiled spring meets performance expectations.