Having problems installing oil seals? The part has had many updates in recent years, which has totally changed the installation process. In this blog, our specialists will give you information and installation tips so that these oil seals no longer cause difficulties during your overhaul or repair job.
Because the inner diameter of the oil seal must be stretched during assembly, it is necessary for the shaft to possess a ramped edge. The angle at which the ramped taper should be chamfered is 30° a 50°. If a flange or keyway is present on the shaft, it is best to use a bushing. The bore should also have a chamfer of 30° over at least 1 mm on the ramped side. Be sure to round off the edges properly in the process.