डिजाइन की दृष्टि से, कंक्रीट वायर मेष कुर्सियाँ विभिन्न शैलियों में उपलब्ध हैं, जिससे आप अपने व्यक्तिगत स्वाद और घर के डेकोर के अनुसार चयन कर सकते हैं। कंक्रीट का ठ硬 और सख्त रूप, वायर मेष के साथ मिलकर एक समकालीन और व्यावहारिक दिखावट प्रस्तुत करता है। इन कुर्सियों की सतह पर मौजूद मेष संरचना न केवल एक अद्वितीय रूप देती है, बल्कि यह हवा के प्रवाह को भी सुनिश्चित करती है, जिससे उन्हें आरामदायक बनाया जा सकता है।

Body Length: length from coil to coil, not including ends (hooks or loops)
Deflection at Load: the distance a spring compresses or extends when a given load is applied
Free Length (FL): the overall length of a spring in the unloaded position
Initial Tension (IT): the number of pounds of force it will take to overcome the tension holding the spring coils together before the spring will start to extend
Inside Dimension (ID): specified when the spring must fit over a rod or mandrel with enough clearance to operate freely
Load: the force applied to a spring that causes a deflection (i.e., movement)
Max Deflection: the difference between the overall length and maximum extension, measured on one side of spring
Maximum Extended Length: the length of an extension at full rated extension
Outside Dimension (OD):specified when the spring must fit into a circular hole (Work in Hole Diameter) with enough clearance to operate freely or when there areother housing issues)
Pitch: the distance from center to center of the wire in adjacent active coils
Solid Height: height of a compression spring under sufficient load to bring all coils into contact with adjacent coils
Spring Rate (stiffness): the change in load per unit deflection
Stress Relieve: a process that subjects the springs to low-temperature heat treatment to relieve residual stresses
Wire Size (WD): the diameter of the actual spring wire