iron board cover with foam_manteles ajustados

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

1. Submersible Pumps These pumps are designed to operate submerged in water. They work by pushing water to the surface as opposed to pulling it. This type is commonly used in residential basements and flooded areas due to its efficiency and effectiveness in removing large volumes of water.

The roller drill uses the rolling action of the roller bit to break the rock and is suitable for drilling holes of 150 ~ 440 mm in diameter on the hard rock. It has the advantages of high efficiency and low labor intensity, and is widely used in large and medium-sized open-pit metal mines. The drill consists of an impactor (or drill bit), a rotary mechanism, a lifting mechanism, a pressure device, a walking mechanism, a slag discharge system, a drill frame and a drill pipe. Rotary drilling machines are only suitable for drilling softer minerals and coal.

디젤 공기 압축기의 사용 사례

In theater, the tableau takes on an entirely different dimension. It serves as a staging technique where actors create a living picture, freezing in dynamic poses to convey emotions and pivotal moments in the narrative. This technique has been particularly prominent in classical theater, where a single scene can encapsulate the essence of a play. The tableau vivant, or living picture, engages the audience's imagination, compelling them to derive meaning from the stillness and the relationships portrayed among the characters. This method not only enhances the visual experience of the performance but also deepens the audience's emotional engagement with the story.

Vertical slag pumps play a crucial role in various industrial applications, particularly in sectors that deal with the extraction and transportation of molten materials, such as metallurgy, steel production, and mining. They are specifically designed to handle abrasive and high-temperature fluids, making them an essential component in managing byproducts during processing activities. This article explores the key aspects of vertical slag pumps, including their functionalities, applications, and the leading manufacturers in the industry.

Construction Sector

Understanding Submarine Hammer Drilling