metallic ironing board cover_ironing cover

Given their critical function, it is imperative that these hoses are durable, reliable, and capable of withstanding high pressures. Any failure in a hydraulic hose can lead to brake failure, posing a significant safety hazard. Therefore, understanding the quality and specifications of these components is essential for vehicle owners and mechanics alike.

1. รอยแตกร้าวหรือเสียหาย หากท่อยางเบรกมีรอยแตกหรือสัญญาณของการเสื่อมสภาพ เช่น สึกกร่อนหรือมีรอยด่าง มีโอกาสสูงที่น้ำมันเบรกจะรั่วไหล

2. Flexibility Despite being reinforced with steel wires, these hoses retain a level of flexibility that allows for easy routing and installation. This flexibility is crucial in applications where space is limited, or tight bends are necessary.

Moreover, hydraulic hoses must be resistant to the chemicals present in brake fluid, which can vary among different vehicle models. The most common types of hydraulic fluids are glycol-based, but some performance vehicles may use silicone-based fluids. Therefore, selecting a hose that can withstand these chemical interactions is vital to maintaining the integrity of the braking system.

PTFE Hose for Power Steering An Essential Component in Automotive Performance

4. Corrosion Resistance Many braided automotive hoses feature stainless steel or other corrosion-resistant materials, which can extend the life of the hose and enhance reliability. This is particularly valuable in vehicles that operate in corrosive environments, such as coastal areas where salt is present in the atmosphere.

Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
Hose bending radius is bigger when it is in motion.
Choose proper fittings, avoid twisting in hose lines bent in two planes.
Avoid twisting in hose by use clamp properly.
Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
Leave proper length when the hose in connected
Choose proper fittings, avoid too small bending radius and excess force.
Choose proper fittings, avoid excessive hose length.
Reuse friction, avoid hose touching the object directly or far away from the object.
Hose Active Working Pressure Working Life
As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
Store Conditions of the Assembly.
1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
3.Can not be placed with erosive products or exposed over gas-volatile on these products.
4.Far away from heat source and equipment which can produce electric field or magnetic field
5.Avoid sunshine or strong artificial light source
6.Avoid to touch the sharp objects or the ground
7.Guarantee against rodent attacking.
8.Observe the rule of “First in, then first out”

Understanding Hydraulic Hoses

When selecting an air hose crimper, it is essential to consider factors such as

In the agricultural industry, hydraulic systems are commonly found in tractors and other farming equipment. Here, hand crimpers aid farmers in maintaining and repairing hoses that are subject to wear and tear, especially when exposed to harsh environmental conditions. This capability not only boosts the efficiency of farming operations but also enhances safety by reducing the likelihood of hydraulic failures.